HO UK model rail
Using foam insulation of 75mm, cut and stepped back to form a tunnel over the rear tracks Note the use of the grey Gorilla tape – very useful for wrapping soldered joints and covering ‘excavated’ channels in the foam base used for the wiring ring wiring circuits.
Using the Polyfilla to begin the shaping over the dried mod-roc. Using a couple of small stainless steel art spatulas to apply the very light an crumbly filler.
Started using the Noch Grassmaster to apply a variety of 2mm – 7mm long ‘grasses’. This always covers over some of the landscaping blemishes especially the mod-roc joints.